How to drain the water from the ROTOR(+) compressor (Video)

The ROTOR software reminds users to check compressor oil and water. This guide, including a video demonstration, explains how to drain water from ROTOR and ROTOR+ compressors. Preparation involves using a supplied tube, a container, and keeping the compressor on during draining. More details are in the compressor manual or via technical support.

Introduction

The ROTOR software will periodically advise the user to check the oil and water for the compressor. The user manual for the compressor can be found here Where can I find the Compressor Manuals?. Unfortunately, some of the instructions in the manuals are not very easy to understand.

The video below shows a short demonstration of how to drain the water. Have the sound on to hear what it will sound like when the liquid is being drained.

Note: This applies to ROTOR and ROTOR+ : What model of ROTOR do I have - ROTOR / ROTOR+?

Preparation 

• A short piece of tube to fit the drain tap (supplied with compressor)
• An old container or something that is easily cleaned
• Turn the compressor on so that it is charged with air during the process.

Video

If you require more information please contact [e-mail] for assistance.