Are there other options for mounting the TouchScreen Computer?

Answer

Yes this is possible.

As standard the TouchScreen Computer which operates the ROTOR(+) is attached to the ROTOR(+) via an arm. As shown in the picture below.

If the ROTOR(+) is to be mounted inside an Anaerobic Chamber or the user prefers not to have the TouchScreen Computer mounted on the ROTOR(+) there are other options. 

It should be noted that wherever the TouchScreen Computer is placed it must be close enough to the ROTOR(+) to be able to connect the communication cable. If the ROTOR(+) is mounted inside an anaerobic chamber this can be achieved with special feed throughs in the chamber design.

The power cable to the TouchScreen Computer can be connected to a mains supply external to the ROTOR(+) but may require a different mains cable with a plug to suit the local plug socket type..

• Remove the arm from the ROTOR(+) and mount it on a wall or vertical surface separate to the ROTOR(+)
  • Note: The fixing plate the arm is mounted to must not be removed as this also secures the end panel to the ROTOR.
• Remove the TouchScreen Computer from the ROTOR(+) arm and mount it on a stand which is designed for this purpose. An example of this can be seen below. (Amazon Link). Other versions and suppliers are available.

If you require more information please contact [e-mail] for assistance.