Ian
- Total activity 689
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 509
Articles
Recent activity by Ian-
Where do all the connectors attach to the Touchscreen Computer on the ROTOR?
Answer : The image below shows an example of the connections on the bottom of the TouchScreen (MCI) Computer on the ROTOR. Please Note : The network connector may not work in both positions as it d...
-
How to resolve main supply voltage variations for the ROTOR.
Answer : Some customers in the USA have experienced issues with their ROTOR which has been caused by the variations in their main supply voltage. This can be due to having a large item such as a fr...
-
What are the V2 Pins for on the ROTOR?
Answer : In 2016 due to changes in the size of the V2 PlusPlates to meet new Standards SInger Instruments modified the size of the location pins on the turntable and station black to compensate. W...
-
What is the accuracy of the ROTOR+?
Answer The ROTOR+ has an accuracy of: X Axis Y Axis +/-0.05mm +/-0.005mm
-
What is the accuracy of the PIXL?
Answer The PIXL has an accuracy of: X Axis Y Axis +/-0.05 +/-0.05
-
What does the 'i' button do in the ROTOR(+) software? (Video)
Introduction : The (i)nfo button on the right side of the screen contains many useful features for setting up, controlling and retrieving information about your ROTOR. This article goes through th...
-
A basic demonstration of the ROTOR HDA Software (Video)
Introduction The ROTOR software is very easy to use. It has been designed to be intuitive requiring no special training. The demonstration in the video below shows how easy it is to use. It concent...
-
How to disconnect/ reconnect the main air connection on the ROTOR (Video)
Answer : When moving the ROTOR or performing maintenance it is occasionally necessary to disconnect/ reconnect an air connection either at the ROTOR or at the compressor. The PDF attached contains ...
-
Why do the main circuit breakers trip when the ROTOR is turned on?
Answer : Due to the filters and motors fitted to the ROTOR there is likely to be current flow to earth in the ROTOR drive system. The EMC filters and the shielding on the cables are intentionally d...
-
How Do I Rename Manual Routines On The ROTOR(+) ?
Answer : There is no method within the ROTOR software for renaming the routines created by the user. The attached PDF explains how it is possible to rename the routine using “Notepad” or other sim...