Ian
- Total activity 795
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 586
Articles
Recent activity by Ian-
How do you make Agar? (video)
Answer : The educational video below shows you how to make and pour 400ml of YPD Agar. Agar must be autoclaved prior to use to avoid the growth of contaminants. However, there are alternatives: - ...
-
Declaration of Conformity - SQWERTY - Pipetting Robot
Introduction The image below shows the Declaration of Conformity for SQWERTY - Pipetting Robot. There is a PDF copy attached to this article.
-
Suggestions for better Pipetting
Answer This article covers suggestions to improve liquid pipetting. See also : Suggestions for better workflows Suggestions Aspirate slow and dispense fast in general. Aspirate < 200 μl /s and...
-
Labware - Hints and tips
Introduction This article contains some useful information when using Labware in the SQWERTY pipetting robot. This article may also be helpful : Labware and Pipette Tips Information Content When t...
-
How to replace the UV Tube - ROTOR(+)
Introduction The manufacturer of the UV Tubes fitted to the ROTOR(+) recommend replacement every 12 months or 100 hours whichever comes first. The UV will conitinue to work past this time but the e...
-
The effect of Air Pressure fluctuations inside the Pipette tip
The dead air pressure prior to aspiration will always equal the Lab's environmental air pressure. When liquid is aspirated into the pipette tip, the humidity of the dead air space will increase, ...
-
Where can we purchase injection kits, needles and accessories for the MK1
Answer : As every customer has their own requirements for the MK1 we no longer supply injection kits. The company in this link supplies accessories that can be used on the MK1 : https://products....
-
What are the dimensions of the PIXL?
Answer: The PIXl is 640mm (w) x 720mm (D) x 800mm (h). See the picture below. Note: These dimensions do not include the monitor, keyboard and mouse shown in the picture. If you require more infor...
-
Do you have a Health & Safety Policy at Singer Instruments?
Answer : Singer Instruments Health & Safety Policy can be found here : SI-POLICY-001-Health and Safety Policy (Rev 13).pdf (Google Drive) If you require more information please contact technicalsu...
-
Matrix Pinning : 7x7 Custom Pinning format program for the ROTOR(+)?
Answer : The 7x7 matrix custom pinning format is mentioned in the article on the Singer Instruments website High Throughput Cell Plating. Note: This routine is expected to work on ROTOR+ (supplied ...